Search history
Clear
PointWrite™ PW40U Touch Module
Inspiration, Collaboration with BenQ Interactive Touch Technology
Application
Can PointWrite be applied on 3 sets of projector side by side to create one larger screen?
PointWrite could only support 2 sets of projector and 2 pcs of camera module side by side. PointWrite does not support the 3rd projector and camera module.
Is it ok to use external power supply for PointWrite-PW40U? If yes, what is the spec. of the power adaptor?
Yes, and the power supply rating should be 5V, 500 mA.
Why does PointWrite-PW40U disconnect intermittently with 5 meter USB cable?
Lacking of power from USB port may cause disconnection issue. The power supply required from USB port is 5V 500mA. Please try to add external DC 5 V to USB cable.
Why is the cursor shivering when projecting to a white board?
If sun's ray reflection by whiteboard enters to the camera module or direct sun's ray on the screen may cause shivering. It is suggested to contact white board dealer to add an anti-reflection film to the whiter board which will improve the issue significantly.
Does the projector support change slides on PowerPoint using a remote which emulates page up and page down commands for both Windows PC and MacOS?
How do I clean my projector lens?
It is normal to have some dust on the lens surface.
Please refer to the below video for a guide to cleaning your projector's lens.
Learn more
Can I use split screen on other devices?
Specification
Why can't PointWrite driver be activated after installation?
The PointWrite driver will not be activated until it detects the camera module. After installing PointWrite driver, do not activate it until a camera module is connected to the computer. After the camera module is detected, PointWrite driver will be activated.
Learn more
Can PointWrite module be applied to 3 sets of projectors side by side to create one larger screen?
No. PointWrite module supports 2 sets of projectors side by side at most.
How many pens does PointWrite support simultaneously?
PointWrite module supports up to 10 pens simultaneously.
The Wired remote port is used to connect to a wired remote control. What is the maximum distance supported by the wired remote control?
Further Query
My remote control is not working. What can be done to fix it?
Please follow below steps for troubleshooting:
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video Learn more
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video Learn more
PointWrite-PW40U auto calibration is failed, how to fix this problem?
1. Check the alignment view: Check the projection pattern is well included from the camera view.
2. Check the environment: If there is ambient bright shining directly to the screen, please use manual calibration to calibrate.
3. Check if the resolution is the same at PC and projector's side.
3D is not working or getting lost sync on my projector. How can I fix it?
Can PointWrite be applied on 3 sets of projector side by side to create one larger screen?
PointWrite could only support 2 sets of projector and 2 pcs of camera module side by side. PointWrite does not support the 3rd projector and camera module.
Is it ok to use external power supply for PointWrite-PW40U? If yes, what is the spec. of the power adaptor?
Yes, and the power supply rating should be 5V, 500 mA.
Why does PointWrite-PW40U disconnect intermittently with 5 meter USB cable?
Lacking of power from USB port may cause disconnection issue. The power supply required from USB port is 5V 500mA. Please try to add external DC 5 V to USB cable.
Why is the cursor shivering when projecting to a white board?
If sun's ray reflection by whiteboard enters to the camera module or direct sun's ray on the screen may cause shivering. It is suggested to contact white board dealer to add an anti-reflection film to the whiter board which will improve the issue significantly.
Does the projector support change slides on PowerPoint using a remote which emulates page up and page down commands for both Windows PC and MacOS?
How do I clean my projector lens?
It is normal to have some dust on the lens surface.
Please refer to the below video for a guide to cleaning your projector's lens.
Learn more
Can I use split screen on other devices?