Projector
Monitor
Lighting
Interactive Display | Signage
Remote Work & Learning
Projector
Monitor
Lighting
Interactive Display | Signage
Remote Work & Learning
Store
Please follow the below steps to fine-tune image clarity.
1. Perform a factory reset to return the projector to its factory default state.
This can be done via Projector Menu> System> Factory Reset
2. The effective distance from the projection lens to the screen is 3.2 meters.
Make sure your projector is placed within this range.
3. The projector performs autofocus automatically.
In case you still feel the image is not clear enough, you can fine-tune image clarity by pressing the focus button on the remote control. The projector will focus the image again.
When focus is complete, press back. The settings will be saved and applied whenever the projector is placed at the same distance from the screen focus was performed at.
